SMOK RPM40 Kit is an ultra-portable pod mod that shapes like a cuboid and breaks the morphological characteristics of traditional pod system vapes. Covered with glossy finish and characteristic material, the whole device looks fancy and stylish. Powered by a built-in 1500mAh battery which can ensure enough running time and help you avoid frequent charging, and a power range of 1W-40W for you to adjust, and you can press the UP/DOWN button to get your preferred power. The internal IQ-R chip is a new one, shortening the firing time to 0.001S, and charging time to two hours. Different from normal tiny and slim pod devices, RPM40 is designed with a 0.96-inch screen, with which, detailed vaping data is clearly presented, like the wattage, resistance, voltage, screen color, puff number, and battery level. Besides, the newly designed RPM Mesh 0.4ohm Coil is designed for the best flavor and excellent vapor production.
Features:
1. Modern and stylish appearance, smooth surface and portable
2. Built-in 1500mAh battery provides sufficient power for the RPM40
3. The RPM40's wider mouthpiece allows more air inhalation
4. Drip tip of a classic box mod to fully enjoy the steam process and huge vapor
5. max output power for 40w
6. 0.96 inch TFT screen
7. more coil options for RPM pod and large e-liquid capacity
8. multiple protections for a better vaping experience
Technical Data:
Size: 25 * 25 * 99mm
Battery Capacity: 1500mAh
E-liquid Capacity: 5ml(Empty pod) / 4.3ml(Standard Pod) / 4.5ml(Nord Pod)
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.1V
Output Wattage: 1W-40W
Charging Current: 0.88A (Max)
Charging Voltage: 5V
Output Mode: Watt
Resistance Range: 0.2ohm-2.50ohm
Overcharge Voltage: 4.3V
Over-discharge Voltage: 2.4V
Standby Current: <140uA
Firing Time: 0.001S
Smok RPM80 Pod Mod Kit has been upgraded based on RPM40. You can choose between two versions: RPM80 Kit or RPM80 Pro Kit. The RPM80 kit integrates 3000mAh large-capacity battery for power supply, which can meet long-time vape without worrying about the insufficient battery capacity. And the RPM80 Pro Kit is powered by a single replaceable 18650 steel case battery, which is more convenient for daily use. And RPM80 Pro can support the transmission of power output up to 80W, more powerful. It has Variable Wattage/Variable Voltage modes to choose from. Fast charging through the Micro USB Port port to keep vape for a long time. In addition, RPM80 compatible two types of cartridges: RPM80 RPM Pod which is compatible with all RPM40 coils and RPM80 RGC Pod which has an innovative RGC conical mesh 0.17ohm coil built-in, providing a more powerful cloud and flavor. Besides, SMOK RPM80 Pro Pod Kit features a newly developed IQ-80 chipset, which makes it more outstanding.
Technical Data:
SMOK RPM80 Pro Kit
Size: 118 * 31.5 * 26mm
Battery: Single 18650 battery
E-liquid Capacity: 5ml
Output Wattage: 1W-80W
Standby Current: <200uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-8.0V
Charging Voltage: 5V
Charging Current: 1.3A (Max)
Charger Output: 5V/2A
Output Mode: Watt
Resistance Range: 0.1ohm-2.5ohm
Coil Type: RPM Mesh 0.4ohm coil (pre-installed)
RGC Conical Mesh 0.17ohm coil
Charging Port: Micro USB Port
Screen: 0.96" color display screen
SMOK RPM80 Kit
Size: 109 * 31.55 * 26mm
Battery: Built-in 3000mAh battery
E-liquid Capacity: 5ml
Output Wattage: 1W-80W
Standby Current: <100uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.0V
Charging Voltage: 5V
Charging Current: 1.2A (Max)
Charger Output: 5V/2A
Output Mode: Watt
Resistance Range: 0.1ohm-3.0ohm
Coil Type: RPM Mesh 0.4ohm coil (pre-installed)
RGC Conical Mesh 0.17ohm coil
Charging Port: Micro USB Port
Screen: 0.96" color display screen
The VOOPOO Drag X Kit is made of metal and leather, so Drag X is not only soft, but also has advantages of anti scratch, anti perspiration and anti fingerprint. While maintaining comfort and portability, VOOPOO Drag X is powered by a single 18650 battery(Sold separately), insert from the bottom, and has a Type-C USB interface for fast charging process, so that you can completely get rid of power anxiety. VOOPOO Drag X maximum output power can be adjusted to 80W to satisfy your needs. With the new GENE.TT Chip, Drag X features fast ignition (only takes 0.001s) and high burst. GENE.TT Chip also offers intelligent functions such as PUSS and SCORE ranking mode. As for the VOOPOO Drag X Pod, it is made of PCTG and can store a whopping 4.5mL of vape juice for fewer refills which are easy anyway thanks to an effortless bottom fill juice port. 510 adapters and other new technologies are also be added to this pod. Drag X is equipped with 0.15ohm and 0.3ohm PnP coil and it is compatible with all PnP coils, including RBA. In addition, Drag X has an infinite airflow system to supports the regulation of any size of the airway. You can get the most comfortable experience through this system no matter which kind of coil or different parameters are set.
Technical Data:
Size: 95mm*32.5mm*28mm
Capacity: 4.5ml
Battery Capacity: Single 18650（Excluding battery）
Mod Material: Alloy+Leather
Pod Material: PCTG
Output Power: 5-80W
Output Voltage: 3.2~4.2V
Resistance: 0.1~3.0ohm
Coils: 0.15ohm PnP-VM6 Coil(DL, 60~80W); 0.3ohm PnP-VM1 Coil(DL, 32~40W)
Compatible with all PnP coils including RBA
Fill: Bottom Fill
Charging Port: Type-C
You may also like:
voopoo drag s
geekvape aegis pod
geekvape aegis boost
smok rpm lite 40w
smok rpm160 dual kit
vape pod kit sale